Kubernetes集群之安装flannel组件

k8s/etcd/bin/etcdctl --ca-file=/k8s/etcd/ssl/ca.pem --cert-file=/k8s/etcd/ssl/server.pem --key-file=/k8s/etcd/ssl/server-key.pem --endpoints="https://192.168.191.130:2379,https://192.168.191.131:2379,https://192.168.191.132:2379" set /coreos.com/network/config ‘{ "network": "172.17.0.0/16", "Backend": {"Type": "vxlan"}}‘
[ /]# k8s/etcd/bin/etcdctl > --ca-file=/k8s/etcd/ssl/ca.pem > --cert-file=/k8s/etcd/ssl/server.pem --key-file=/k8s/etcd/ssl/server-key.pem > --endpoints="https://192.168.191.130:2379,https://192.168.191.131:2379,https://192.168.191.132:2379" > set /coreos.com/network/config ‘{ "network": "172.17.0.0/16", "Backend": {"Type": "vxlan"}}‘
{ "network": "172.17.0.0/16", "Backend": {"Type": "vxlan"}}
[ /]#

查看写入的信息，在其他节点也可以查看到

/k8s/etcd/bin/etcdctl --ca-file=/k8s/etcd/ssl/ca.pem --cert-file=/k8s/etcd/ssl/server.pem --key-file=/k8s/etcd/ssl/server-key.pem --endpoints="https://192.168.191.130:2379,https://192.168.191.131:2379,https://192.168.191.132:2379" get /coreos.com/network/config

4.导入二进制包，flannel安装在node节点上
哪个节点需要跑业务，哪个节点就要安装fannel组件

[ /]# cp /abc/k8s/flannel-v0.10.0-linux-amd64.tar.gz /root/k8s/
[ /]# cp /abc/k8s/flannel-v0.10.0-linux-amd64.tar.gz /root/k8s/
[ /]# cd /root/k8s
[ k8s]# scp flannel-v0.10.0-linux-amd64.tar.gz :/opt/
‘s password: 
flannel-v0.10.0-linux-amd64.tar.gz                                                    100% 9479KB  53.4MB/s   00:00    
[ k8s]# scp flannel-v0.10.0-linux-amd64.tar.gz :/opt/
‘s password: 
flannel-v0.10.0-linux-amd64.tar.gz

5.部署与配置flannel，编辑flannel启动脚本，加入到systemd中
以node1节点为例

[ yum.repos.d]# cd /opt
[ opt]# tar xf flannel-v0.10.0-linux-amd64.tar.gz 
[ opt]# ls
containerd  flanneld  flannel-v0.10.0-linux-amd64.tar.gz  mk-docker-opts.sh  README.md  rh

创建fannel工作目录

[ opt]# mkdir /k8s/flannel/{cfg,bin,ssl} -p
[ opt]# mv mk-docker-opts.sh /k8s/flannel/bin/
[ opt]# mv flanneld /k8s/flannel/bin/

fannel组件启动脚本

[ opt]# vim flannel.sh
#!/bin/bash
ETCD_ENDPOINTS=${1:-"http://127.0.0.1:2379"}
cat <<EOF >/k8s/flannel/cfg/flanneld
FLANNEL_OPTIONS="--etcd-endpoints=${ETCD_ENDPOINTS} -etcd-cafile=/k8s/etcd/ssl/ca.pem -etcd-certfile=/k8s/etcd/ssl/server.pem -etcd-keyfile=/k8s/etcd/ssl/server-key.pem"
EOF
cat <<EOF >/usr/lib/systemd/system/flanneld.service
[Unit]
Description=Flanneld overlay address etcd agent
After=network-online.target network.target
Before=docker.service
[Service]
Type=notify
EnvironmentFile=/k8s/flannel/cfg/flanneld
ExecStart=/k8s/flannel/bin/flanneld --ip-masq \$FLANNEL_OPTIONS
ExecStartPost=/k8s/flannel/bin/mk-docker-opts.sh -k DOCKER_NETWORK_OPTIONS -d /run/flannel/subnet.env
Restart=on-failure
[Install]
WantedBy=multi-user.target
EOF
systemctl daemon-reload
systemctl enable flanneld
systemctl restart flanneld

开启flannel网络功能，指定etcdIP：端口

[ flannel]# bash flannel.sh https://192.168.191.130:2379,https://192.168.191.131:2379,https://192.168.191.132:2379

两个node节点都需要
6.配置docker，以使用flannel生成的子网
以node1为例
让docker连接flannel的网段

[ flannel]# vim /usr/lib/systemd/system/docker.service 
#在第十三行注释下添加
14 EnvironmentFile=/run/flannel/subnet.env
#在ExecStart中添加
15 ExecStart=/usr/bin/dockerd $DOCKER_NETWORK_OPTIONS -H fd:// --containerd=/run/containerd/containerd.sock

重启docker服务

[ flannel]# systemctl daemon-reload
[ flannel]# systemctl restart docker

7.启动flannel
查看node01节点分配的flannelIP地址，为172.17.45.0/24

[ flannel]# cat /run/flannel/subnet.env 
DOCKER_OPT_BIP="--bip=172.17.45.1/24"
DOCKER_OPT_IPMASQ="--ip-masq=false"
DOCKER_OPT_MTU="--mtu=1450"
DOCKER_NETWORK_OPTIONS=" --bip=172.17.45.1/24 --ip-masq=false --mtu=1450"

查看fannel网络

[ flannel]# ifconfig
docker0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
    inet 172.17.0.1  netmask 255.255.0.0  broadcast 172.17.255.255
ens33: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
    inet 192.168.191.131  netmask 255.255.255.0  broadcast 192.168.247.255
flannel.1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1450
    inet 172.17.45.0  netmask 255.255.255.255  broadcast 0.0.0.0
lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
    inet 127.0.0.1  netmask 255.0.0.0
virbr0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
    inet 192.168.122.1  netmask 255.255.255.0  broadcast 192.168.122.255

此时node1与node2中的容器就实现互通了
在 两个node节点分别测试

[ flannel]# docker run -it centos:7 /bin/bash
Unable to find image ‘centos:7‘ locally
7: Pulling from library/centos
ab5ef0e58194: Pull complete 
Digest: sha256:4a701376d03f6b39b8c2a8f4a8e499441b0d567f9ab9d58e4991de4472fb813c
Status: Downloaded newer image for centos:7
[ /]# yum install net-tools -y

[ opt]# docker run -it centos:7 /bin/bash
Unable to find image ‘centos:7‘ locally
7: Pulling from library/centos
ab5ef0e58194: Pull complete 
Digest: sha256:4a701376d03f6b39b8c2a8f4a8e499441b0d567f9ab9d58e4991de4472fb813c
Status: Downloaded newer image for centos:7
[ /]# yum install net-tools -y

node1容器ip

[ /]# ifconfig
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1450
    inet 172.17.45.2  netmask 255.255.255.0  broadcast 172.17.45.255

node2节点ping node1 容器

[ /]# ifconfig
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1450
    inet 172.17.42.2  netmask 255.255.255.0  broadcast 172.17.42.255
[ /]# ping 172.17.45.2
PING 172.17.45.2 (172.17.45.2) 56(84) bytes of data.
64 bytes from 172.17.45.2: icmp_seq=1 ttl=62 time=0.792 ms
64 bytes from 172.17.45.2: icmp_seq=2 ttl=62 time=0.762 ms
64 bytes from 172.17.45.2: icmp_seq=3 ttl=62 time=0.483 ms
64 bytes from 172.17.45.2: icmp_seq=4 ttl=62 time=1.38 ms
^C
--- 172.17.45.2 ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 3003ms
rtt min/avg/max/mdev = 0.483/0.855/1.384/0.328 ms
[ /]#

成功ping通。两个node节点容器互通，fannel组件安装部署成功！