Fedora 8 环境 2.6内核编译步骤
第一次编译2.6的内核，十分不顺手，老是有问题。（Fedora 8，内核2.6.25 ）
开始的时候我用的是2.6.26的内核在root目录下解压，在make menuconfig之后没有位子可以选择arm的，在网上查了后输入命令make ARCH=arm CROSS_COMPILE=arm-linux- menuconfig，但这也有问题，因为你在menuconfig的选项都没有被保存下来，它还是要让你一个一个的慢慢的选择，这太麻烦了，想办法。在2.6.26的目录下修改Makefile，主要是以下2项：
ARCH＝arm
CROSS_COMPILE=/usr/local/arm/3.4.1/bin/arm-linux
（/usr/local/arm/3.4.1/bin/arm-linux是你编译器的地址）
这样修改后直接make menuconfig就行了。可是make以后马上就出问题了如下：
include/asm/page.h:111:2: #error Unknown user operations model
make[1]: *** [arch/arm/kernel/asm-offsets.s] 错误 1
make: *** [prepare0] 错误 2
make[1]: *** [arch/arm/kernel/asm-offsets.s] 错误 1
make: *** [prepare0] 错误 2
这个问题我搞了3天也没搞好。
后来把内核放在/usr/src目录下重新编译，没有arch/arm/kernel/asm-offsets.s这个问题了，可是又有新的问题了：
drivers/gpio/gpiolib.c: In function `gpiolib_dbg_show':
drivers/gpio/gpiolib.c:1060: error: implicit declaration of function `gpio_to_irq'
make[2]: *** [drivers/gpio/gpiolib.o] 错误 1
make[1]: *** [drivers/gpio] 错误 2
make: *** [drivers] 错误 2
我到drivers/gpio/目录下修改makefile把gpiolib.c给屏蔽了。但是新的问题又来了：
scripts/kconfig/mconf arch/arm/Kconfig
#
# using defaults found in /boot/config-2.6.25.6-27.fc8
#
/boot/config-2.6.25.6-27.fc8:1622:warning: symbol value 'm' invalid for IWL4965
/boot/config-2.6.25.6-27.fc8:1769:warning: symbol value 'm' invalid for ISDN
Your display is too small to run Menuconfig!
t must be at least 19 lines by 80 columns.
make[1]: *** [menuconfig] 错误 1
make: *** [menuconfig] 错误 2
没办法我换了个版本，2.6.25重新来过，可在make之后问题又来了：
include/asm/glue.h:119:2: #error Unknown data abort handler type
In file included from include/linux/mm_types.h:13,
from include/linux/sched.h:61,
from arch/arm/kernel/asm-offsets.c:13:
include/asm/page.h:103:2: #error Unknown user operations model
In file included from include/asm/semaphore.h:13,
from include/linux/sched.h:64,
from arch/arm/kernel/asm-offsets.c:13:
include/asm/locks.h:15:5: warning: "__LINUX_ARM_ARCH__" is not defined
make[1]: *** [arch/arm/kernel/asm-offsets.s] 错误 1
make: *** [prepare0] 错误 2
换版本2.6.27，在make之后：
arch/arm/plat-s3c24xx/gpiolib.c:254: undefined reference to `gpiochip_add'
make: *** [.tmp_vmlinux1] 错误 1
我把gpiolib给屏蔽了但还是出现错误：
rivers/gpio/gpiolib.c: In function `gpiolib_dbg_show':
drivers/gpio/gpiolib.c:1060: error: implicit declaration of function `gpio_to_irq'
make[2]: *** [drivers/gpio/gpiolib.o] 错误 1
make[1]: *** [drivers/gpio] 错误 2
make: *** [drivers] 错误 2
换版本，因为我个人感觉我用的这些版本里对arm的支持太多了，像我选的arm2410的支持就同时支持2440，2400等好几个。所以我用了2.6.15在make之后：
drivers/media/radio/radio-maestro.c:294: warning: comparison is always true due to limited range of data type
drivers/media/radio/radio-maestro.c:294: warning: comparison is always true due to limited range of data type
drivers/media/radio/radio-maestro.c:297: warning: comparison is always true due to limited range of data type
drivers/media/radio/radio-maestro.c:297: warning: comparison is always true due to limited range of data type
make[3]: *** [drivers/media/radio/radio-maestro.o] 错误 1
make[2]: *** [drivers/media/radio] 错误 2
make[1]: *** [drivers/media] 错误 2
make: *** [drivers] 错误 2
老方法修改当前目录的makefile。在编译：
make[3]: *** [drivers/video/console/vgacon.o] 错误 1
make[2]: *** [drivers/video/console] 错误 2
make[1]: *** [drivers/video] 错误 2
make: *** [drivers] 错误 2
在make menuconfig时Graphics support ->console display driver support->vga text console(不选这个)在编译：
usr/local/arm/3.4.1/bin/arm-linux-ld: no machine record defined
make: *** [.tmp_vmlinux1] 错误 1
在 google 查到的都是说arch/arm/kernel/vmlinux.lds的最后两行(如下)，给注释起来，但是没说为什么
ASSERT((__proc_info_end - __proc_info_begin), "missing CPU support")
ASSERT((__arch_info_end - __arch_info_begin), "no machine record defined"
后来自己到 arch/arm/kernel/vmlinux.lds 看注释才知道
These must never be empty
If you have to comment these two assert statements out, your
binutils is too old (for other reasons as well)
在编译通过。