Redis 集群部署及踩过的坑

聚沙成塔积水成渊

2018-10-27

Redis 集群部署及踩过的坑

摘要： 本文目标要在单台机器上搭建Redis集群，方式是通过不同的TCP端口启动多个实例，然后组成集群，同时记录在搭建过程中踩过的坑。安装准备 centos版本：6.7 redis版本：3.2.3 安装方式：源码安装服务器：1台操作步骤此处默认已安装好单台redis 1、启动Redis多个实例我们在Redis安装目录下创建目录cluster，并编写7000.conf~7005.conf 6个配置文件，这6个配置文件用来启动6个实例，后面将使用这6个实例组成集群。

本文目标

要在单台机器上搭建Redis集群，方式是通过不同的TCP端口启动多个实例，然后组成集群，同时记录在搭建过程中踩过的坑。

安装准备

centos版本：6.7

redis版本：3.2.3

安装方式：源码安装

服务器：1台

操作步骤

此处默认已安装好单台redis

1、启动Redis多个实例

我们在Redis安装目录下创建目录cluster，并编写7000.conf~7005.conf 6个配置文件，这6个配置文件用来启动6个实例，后面将使用这6个实例组成集群。

以7000.conf为例，配置文件需要填写如下几项：

Redis 集群部署及踩过的坑

分别启动6个实例

Redis 集群部署及踩过的坑

启动成功后，看一下进程

Redis 集群部署及踩过的坑

至此，ip=192.168.186.91机器上创建了6个实例，端口号为port=7000~7005。

2、安装ruby

1）yum安装ruby和依赖的包。

[root@itfirst redis_cluster]# yum -y install ruby ruby-devel rubygems rpm-build

2）使用gem这个命令来安装redis接口

[root@itfirst redis_cluster]# gem install redis

ERROR: Error installing redis:

redis requires Ruby version >= 2.2.2.

这一步骤中出现了bug,度娘告诉我是Ruby版本太低，需要升级版本。

3）升级Ruby的版本

安装rvm，我不知道这是个什么东西，但是感觉像是Ruby的一个包管理器。

[root@itfirst redis_cluster]# curl -L get.rvm.io | bash -s stable

% Total % Received % Xferd Average Speed Time Time Time Current

Dload Upload Total Spent Left Speed

100 24090 100 24090 0 0 10919 0 0:00:02 0:00:02 --:--:-- 91242

Downloading https://github.com/rvm/rvm/archive/1.29.3.tar.gz

Downloading https://github.com/rvm/rvm/releases/download/1.29.3/1.29.3.tar.gz.asc

gpg: 于 2017年09月11日星期一 04时59分21秒 CST 创建的签名，使用 RSA，钥匙号 BF04FF17

gpg: 无法检查签名：No public key

Warning, RVM 1.26.0 introduces signed releases and automated check of signatures when GPG software found.Assuming you trust Michal Papis import the mpapis public key (downloading the signatures).

GPG signature verification failed for '/usr/local/rvm/archives/rvm-1.29.3.tgz' -'https://github.com/rvm/rvm/releases/download/1.29.3/1.29.3.tar.gz.asc'! Try to install GPG v2 and then fetch the publickey:

gpg2 --recv-keys 409B6B1796C275462A1703113804BB82D39DC0E3

or if it fails:

command curl -sSL https://rvm.io/mpapis.asc | gpg2 --import -

the key can be compared with:

https://rvm.io/mpapis.asc

https://keybase.io/mpapis

NOTE: GPG version 2.1.17 have a bug which cause failures during fetching keys from remote server. Please downgrade orupgrade to newer version (if available) or use the second method described above.

这一操作得到了：

gpg2 –recv-keys 409B6B1796C275462A1703113804BB82D39DC0E3

然后利用该密钥下载Ruby并升级。

[root@itfirst redis_cluster]# gpg --keyserver hkp://keys.gnupg.net --recv-keys 409B6B1796C275462A1703113804BB82D39DC0E3

gpg: 下载密钥‘D39DC0E3’，从 hkp 服务器 keys.gnupg.net

gpg: /root/.gnupg/trustdb.gpg：建立了信任度数据库

gpg: 密钥 D39DC0E3：公钥“Michal Papis (RVM signing) <[email protected]>”已导入

gpg: 没有找到任何绝对信任的密钥

gpg: 合计被处理的数量：1

gpg: 已导入：1 (RSA: 1)

[root@itfirst redis_cluster]# curl -sSL https://get.rvm.io | bash -s stable

Downloading https://github.com/rvm/rvm/archive/1.29.3.tar.gz

Downloading https://github.com/rvm/rvm/releases/download/1.29.3/1.29.3.tar.gz.asc

gpg: 于 2017年09月11日星期一 04时59分21秒 CST 创建的签名，使用 RSA，钥匙号 BF04FF17

gpg: 完好的签名，来自于“Michal Papis (RVM signing) <[email protected]>”

gpg: 亦即“Michal Papis <[email protected]>”

gpg: 亦即“[jpeg image of size 5015]”

gpg: 警告：这把密钥未经受信任的签名认证！

gpg: 没有证据表明这个签名属于它所声称的持有者。

主钥指纹： 409B 6B17 96C2 7546 2A17 0311 3804 BB82 D39D C0E3

子钥指纹： 62C9 E5F4 DA30 0D94 AC36 166B E206 C29F BF04 FF17

GPG verified '/usr/local/rvm/archives/rvm-1.29.3.tgz'

Creating group 'rvm'

Installing RVM to /usr/local/rvm/

Installation of RVM in /usr/local/rvm/ is almost complete:

* First you need to add all users that will be using rvm to 'rvm' group,

and logout - login again, anyone using rvm will be operating with `umask u=rwx,g=rwx,o=rx`.

* To start using RVM you need to run `source /etc/profile.d/rvm.sh`

in all your open shell windows, in rare cases you need to reopen all shell windows.

接着，source环境，让rvm可用。

[root@itfirst ~]# source /usr/local/rvm/scripts/rvm

查看Ruby可用版本

[root@itfirst ~]# rvm list known

# MRI Rubies

[ruby-]1.8.6[-p420]

[ruby-]1.8.7[-head] # security released on head

[ruby-]1.9.1[-p431]

[ruby-]1.9.2[-p330]

[ruby-]1.9.3[-p551]

[ruby-]2.0.0[-p648]

[ruby-]2.1[.10]

[ruby-]2.2[.7]

[ruby-]2.3[.4]

[ruby-]2.4[.1]

ruby-head

# for forks use: rvm install ruby-head-<name> --url https://github.com/github/ruby.git --branch 2.2

# JRuby

jruby-1.6[.8]

jruby-1.7[.27]

jruby[-9.1.13.0]

jruby-head

# Rubinius

rbx-1[.4.3]

rbx-2.3[.0]

rbx-2.4[.1]

rbx-2[.5.8]

rbx-3[.84]

rbx-head

# Opal

opal

# Minimalistic ruby implementation - ISO 30170:2012

mruby-1.0.0

mruby-1.1.0

mruby-1.2.0

mruby-1[.3.0]

mruby[-head]

# Ruby Enterprise Edition

ree-1.8.6

ree[-1.8.7][-2012.02]

# Topaz

topaz

# MagLev

maglev[-head]

maglev-1.0.0

# Mac OS X Snow Leopard Or Newer

macruby-0.10

macruby-0.11

macruby[-0.12]

macruby-nightly

macruby-head

# IronRuby

ironruby[-1.1.3]

ironruby-head

可以看到最新的版本是2.4.1，本文安装2.3.0

至此，我们升级了Ruby的版本。

[root@itfirst ~]# rvm install 2.3.0

Searching for binary rubies, this might take some time.

Found remote file https://rvm_io.global.ssl.fastly.net/binaries/centos/6/x86_64/ruby-2.3.0.tar.bz2

Checking requirements for centos.

Installing requirements for centos.

Installing required packages: autoconf, automake, bison, libffi-devel, libtool, readline-devel, sqlite-devel, libyaml-devel..........

Requirements installation successful.

ruby-2.3.0 - #configure

ruby-2.3.0 - #download

% Total % Received % Xferd Average Speed Time Time Time Current

Dload Upload Total Spent Left Speed

100 21.9M 100 21.9M 0 0 266k 0 0:01:24 0:01:24 --:--:-- 278k

No checksum for downloaded archive, recording checksum in user configuration.

ruby-2.3.0 - #validate archive

ruby-2.3.0 - #extract

ruby-2.3.0 - #validate binary

ruby-2.3.0 - #setup

ruby-2.3.0 - #gemset created /usr/local/rvm/gems/ruby-2.3.0@global

ruby-2.3.0 - #importing gemset /usr/local/rvm/gemsets/global.gems..............................

ruby-2.3.0 - #generating global wrappers........

ruby-2.3.0 - #gemset created /usr/local/rvm/gems/ruby-2.3.0

ruby-2.3.0 - #importing gemsetfile /usr/local/rvm/gemsets/default.gems evaluated to empty gem list

ruby-2.3.0 - #generating default wrappers........

4）安装gem redis接口

[root@itfirst ~]# rvm use 2.3.0

Using /usr/local/rvm/gems/ruby-2.3.0

[root@itfirst ~]# rvm remove 1.8.7

ruby-1.8.7-head - #already gone

Using /usr/local/rvm/gems/ruby-2.3.0

[root@itfirst ~]# ruby --version

ruby 2.3.0p0 (2015-12-25 revision 53290) [x86_64-linux]

[root@itfirst ~]# gem install redis

Fetching: redis-4.0.1.gem (100%)

Successfully installed redis-4.0.1

Parsing documentation for redis-4.0.1

Installing ri documentation for redis-4.0.1

Done installing documentation for redis after 0 seconds

1 gem installed

5）安装rubygems

# yum install -y rubygems

到目前为止，我们的Ruby和运行redis-trib.rb需要的环境安装完成了。

3、Redis集群搭建

有了Ruby执行环境，可以开始将之前的6个实例组建成集群了。

redis-trib.rb create --replicas 1 192.168.186.91:7000 192.168.186.91:7001 192.168.186.91:7002 192.168.186.91:7003 192.168.186.91:7004 192.168.186.91:7005

有三个master，有三个是slave。后面跟上6个实例就好了，形式就是ip:port

【此处有坑】

第一坑

[root@itfirst src]# redis-trib.rb create --replicas 1 192.168.186.91:7000 192.168.186.91:7001 192.168.186.91:7002 192.168.186.91:7003 192.168.186.91:7004 192.168.186.91:7005

-bash: redis-trib.rb: command not found

[root@itfirst src]# cp redis-trib.rb /usr/local/bin

需要将redis-trib.rb复制到/usr/local/bin目录下。

第二坑

[root@itfirst bin]# redis-trib.rb create --replicas 1 192.168.186.91:7000 192.168.186.91:7001 192.168.186.91:7002 192.168.186.91:7003 192.168.186.91:7004 192.168.186.91:7005

>>> Creating cluster

[ERR] Node 192.168.186.91:7000 is not empty. Either the node already knows other nodes (check with CLUSTERNODES) or contains some key in database 0.

踩完第一坑后，继续执行，发现了第二坑，还好有度娘，但是网上各种说法都有（主要参照了《极客on之路》的博客），发现错误的原因是redis数据库没有清除。

[root@itfirst src]# redis-cli -h 192.168.186.91 -p 7001

192.168.186.91:7001> flushdb

192.168.186.91:7001> quit

[root@itfirst src]# redis-cli -h 192.168.186.91 -p 7002

192.168.186.91:7002> flushdb

192.168.186.91:7002> quit

[root@itfirst src]# redis-cli -h 192.168.186.91 -p 7003

192.168.186.91:7003> flushdb

192.168.186.91:7003> quit

[root@itfirst src]# redis-cli -h 192.168.186.91 -p 7004

192.168.186.91:7004> flushdb

192.168.186.91:7004> quit

[root@itfirst src]# redis-cli -h 192.168.186.91 -p 7005

192.168.186.91:7005> flushdb

192.168.186.91:7005> quit

[root@itfirst src]# redis-trib.rb create --replicas 1 192.168.186.91:7000 192.168.186.91:7001 192.168.186.91:7002 192.168.186.91:7003 192.168.186.91:7004 192.168.186.91:7005

>>> Creating cluster

>>> Performing hash slots allocation on 6 nodes...

Using 3 masters:

192.168.186.91:7000

192.168.186.91:7001

192.168.186.91:7002

Adding replica 192.168.186.91:7003 to 192.168.186.91:7000

Adding replica 192.168.186.91:7004 to 192.168.186.91:7001

Adding replica 192.168.186.91:7005 to 192.168.186.91:7002

M: 61b2b608177374fd0382c872f996a2c25f62daac 192.168.186.91:7000

slots:0-5460,9189 (5462 slots) master

M: 50e678c98c31baa4ece1cba096cc34b4545456f3 192.168.186.91:7001

slots:5461-10922 (5462 slots) master

M: b8dc855a92d1c9a6e358380286a757011c40601d 192.168.186.91:7002

slots:9189,10923-16383 (5462 slots) master

S: 42392d8b4665500b3229b5c5b9dcebed311c9cdf 192.168.186.91:7003

replicates 61b2b608177374fd0382c872f996a2c25f62daac

S: 4e8cd9bae1dc0ffa63a3b8315e3f92b0490e65f8 192.168.186.91:7004

replicates 50e678c98c31baa4ece1cba096cc34b4545456f3

S: 3344981c3290c39b0d9f427842398c17de835293 192.168.186.91:7005

replicates b8dc855a92d1c9a6e358380286a757011c40601d

Can I set the above configuration? (type 'yes' to accept): yes

/usr/local/rvm/gems/ruby-2.3.0/gems/redis-4.0.1/lib/redis/client.rb:119:in `call': ERR Slot 9189 is already busy (Redis::CommandError)

from /usr/local/rvm/gems/ruby-2.3.0/gems/redis-4.0.1/lib/redis.rb:2764:in `block in method_missing'

from /usr/local/rvm/gems/ruby-2.3.0/gems/redis-4.0.1/lib/redis.rb:45:in `block in synchronize'

from /usr/local/rvm/rubies/ruby-2.3.0/lib/ruby/2.3.0/monitor.rb:214:in `mon_synchronize'

from /usr/local/rvm/gems/ruby-2.3.0/gems/redis-4.0.1/lib/redis.rb:45:in `synchronize'

from /usr/local/rvm/gems/ruby-2.3.0/gems/redis-4.0.1/lib/redis.rb:2763:in `method_missing'

from /usr/local/bin/redis-trib.rb:212:in `flush_node_config'

from /usr/local/bin/redis-trib.rb:776:in `block in flush_nodes_config'

from /usr/local/bin/redis-trib.rb:775:in `each'

from /usr/local/bin/redis-trib.rb:775:in `flush_nodes_config'

from /usr/local/bin/redis-trib.rb:1296:in `create_cluster_cmd'

from /usr/local/bin/redis-trib.rb:1696:in `<main>'

第三坑